top of page

Polycarbonate Awning Singapore Guide: Polycarbonate vs Metal Awnings Compared

Nov 2
4 min read

An awning is one of the most useful additions to a Singapore home. It keeps afternoon sun off your windows, lets you leave laundry out during a sudden downpour and turns a bare yard into usable space. The two most common choices are polycarbonate and metal, and each suits a different situation.

This guide compares a polycarbonate awning in Singapore with a metal awning so you can decide which fits your home, your budget and the way you use the space.

What Is a Polycarbonate Awning?

A polycarbonate awning uses rigid plastic sheets fixed onto an aluminium or steel frame. The sheets come clear, tinted (bronze, grey, opal) or with a heat-reflective coating. Good quality sheets have a UV-protective layer on the outer face so they do not yellow or turn brittle quickly under strong sun.

Homeowners choose polycarbonate mainly because it lets light through. A kitchen yard, a back garden or a dining patio stays bright while still being protected from rain.

What Is a Metal Awning?

A metal awning uses profiled metal sheets, usually zinc-aluminium coated steel or aluminium, on a steel or aluminium frame. The sheets are opaque, so they block light completely. Many are available with an insulated sandwich panel (metal skin, foam core) that cuts heat and rain noise.

Metal is the usual pick for car porches and side passages.

Polycarbonate vs Metal Awning: Side-by-Side

Factor

Polycarbonate awning

Metal awning

Natural light

Lets light through (clear, tinted or opal)

Blocks light fully

Heat underneath

Can feel warm under clear sheets; tinted or heat-reflective sheets help

Cooler shade, especially with insulated panels

Rain noise

Moderate

Loud on bare sheets; quiet with insulated panels

Impact resistance

Very high, does not shatter

High, may dent under heavy impact

Lifespan factors

Depends on UV coating quality and cleaning

Depends on coating, fixings and rust control

Maintenance

Regular cleaning to keep it clear

Check for rust at cut edges and screws

Best for

Yards, patios, laundry areas, walkways

Car porches, side passages, service areas

How Singapore Weather Affects Your Choice

Heat and UV

Our sun is intense all year. Under a clear polycarbonate sheet, the area can feel warmer than expected because light and some heat pass straight through. If the space faces west, a bronze, grey or heat-reflective sheet is usually a better choice than fully clear. Metal gives deeper shade, and an insulated panel keeps the space below noticeably cooler.

Heavy rain

Both materials handle monsoon rain well if the awning is installed with the right slope, sealed joints and a gutter where the water needs to go. Most leaks come from poor flashing against the wall, not from the sheet itself. Rain noise is worth thinking about if the awning sits outside a bedroom. Bare metal is the loudest option.

Humidity and mould

Polycarbonate shows dirt and algae more visibly, especially on the underside. A wash every few months keeps it looking clean. Metal hides dirt better but needs a periodic check for rust at screws and cut edges.

HDB, Condo and Landed Homes

  • Landed homes: You have the most flexibility. Large awnings over yards and car porches are common. Larger or attached structures may need approval, and a contractor should advise on this before work starts.

  • Condominiums: Ground-floor and penthouse units usually need approval from the MCST, which often sets the colour and design so the building looks uniform.

  • HDB flats: External additions are subject to HDB and town council guidelines. Check with them before planning any awning.

What Affects the Cost?

We do not quote fixed prices without seeing the site, because these factors change the price a lot:

  • Size and projection of the awning

  • Sheet type, thickness and coating (solid, multiwall, tinted, insulated)

  • Frame material and finish (aluminium, galvanised steel, powder coating)

  • Gutters, downpipes and wall flashing

  • Access, height and whether old structures need removal

Which Should You Choose?

Choose polycarbonate if you want light, a brighter outdoor space and a lighter look. Choose metal if you want full shade, a cooler space and a lower-maintenance finish, particularly over a car. Many homes use both: polycarbonate over the garden and metal over the porch.

You can explore our polycarbonate roofing services and our work as a metal roof contractor in Singapore. If you want daylight from a solid roof instead, see our skylight and ventilator options.

FAQ

Does a polycarbonate awning turn yellow in Singapore?

Cheaper sheets without proper UV protection can yellow and become brittle. A sheet with a UV-protective layer, installed with that layer facing the sun, holds its clarity far longer.

Is a metal awning too noisy in the rain?

Bare single-skin metal sheets are noisy in heavy rain. An insulated sandwich panel reduces the noise a great deal and also lowers heat underneath.

Can I replace an old awning sheet without changing the frame?

Often, yes. If the frame is sound and free of serious rust, we can replace only the sheets. We check the frame first so new sheets are not fixed onto a weak structure.

Get Expert Advice on Your Awning

Not sure which awning suits your home? Amber Services offers a free site inspection to measure the space, check your walls and recommend the right material. Call us on 6641 1524 or WhatsApp +65 8193 5135 to book a visit.

 
 
 

Comments


Roofing Contractor Singapore

We are one-stop Roofing & Building Contractor in Singapore. We're determined to provide you with the highest quality services available. We want to ensure that the end result leaves you satisfied. Trust our team to do everything we can to give you the best customer service experience possible.

Get in Touch

15, Eunos Crescent, #06-2825,

Singapore 400015

Quick Links

About Us

Contact Us

  • Facebook
  • LinkedIn
  • Instagram

Disclaimer: All the photographs are genuined and taken from the projects of Amber Services Pte Ltd and its subsidiary companies.

bottom of page