Polycarbonate Sheet Singapore: Solid vs Multiwall Sheets Explained
Polycarbonate is one of the most popular roofing materials for awnings, walkways, carports and skylights in Singapore. Once you decide on polycarbonate, the next question is which type of sheet to use. The two main options are solid and multiwall, and the right choice depends on what you want from the space underneath.
This guide explains how each polycarbonate sheet in Singapore performs, so you can choose with confidence.
What Is a Solid Polycarbonate Sheet?
A solid sheet is a single, uniform layer of polycarbonate. It looks very similar to glass but is far tougher and much lighter. Solid sheets are available clear, tinted or with a heat-reflective coating, and can be flat or profiled.
Because it is one continuous layer, a solid sheet gives a clean, glass-like view through the roof.
What Is a Multiwall Polycarbonate Sheet?
A multiwall sheet has two or more thin layers joined by internal ribs, forming hollow channels along its length. Twin-wall is the most common type. You can see the lines of the channels when you look through it, so the light is softer and more diffused.
Those trapped air pockets give multiwall sheets better insulation and make them very light for their thickness.
Solid vs Multiwall: Quick Comparison
Factor | Solid polycarbonate | Multiwall polycarbonate |
Appearance | Glass-like, clear view | Lined, diffused light |
Impact strength | Very high | Good, but thinner skins can dent |
Heat insulation | Lower | Better, thanks to air channels |
Rain noise | Moderate | Usually quieter |
Weight | Heavier for the same thickness | Lighter |
Dirt and moisture | Easy to wipe clean | Channels must be sealed to stop dirt, insects and algae getting in |
Best for | Feature awnings, skylights, areas where the view matters | Large patios, carports, walkways, covered yards |
How Each Sheet Handles Singapore Conditions
Sun and heat
Our year-round sun is hard on any roofing sheet. Both types should have a UV-protective layer on the outer face. Clear solid sheets let a lot of heat through, which can make the space below uncomfortable in the afternoon. Multiwall sheets reduce heat transfer, and tinted or opal options cut glare further. For west-facing areas, a tinted or heat-reflective sheet is worth considering in either type.
Monsoon rain
Both types are waterproof. Leaks usually come from poor detailing: wrong slope, missing sealing tape on multiwall ends, or gaps at the wall flashing. With multiwall sheets, the open ends must be sealed with the correct tape and end caps. If not, water, dust and insects get into the channels, and the sheet turns green or cloudy inside, which cannot be cleaned.
Humidity
Condensation and algae are common in our climate. A solid sheet is easy to wash on both sides. A multiwall sheet relies on good sealing to keep its channels clear.
Choosing the Right Thickness
Thickness affects strength, span and cost. A thicker sheet can span further between supports and resist sagging, but it is heavier and costs more. The right thickness depends on the roof size, the frame spacing and whether people need to access the roof for cleaning. A contractor should match the sheet to the frame, not the other way round.
Checklist Before You Decide
How important is a clear view through the roof?
Does the space face west or get strong afternoon sun?
Is the area under the roof used as a living or dining space?
Will rain noise be heard from a bedroom?
How large is the roof span?
Who will clean the roof, and how often?
What Affects the Cost?
Sheet type, thickness and coating
Total area and span between supports
Frame material (aluminium or steel) and finish
Edge sealing, flashing and gutters
Height, access and removal of old roofing
Which Sheet Is Right for You?
Pick solid polycarbonate for a premium, glass-like look over a smaller feature area or skylight. Pick multiwall polycarbonate for larger covered spaces where comfort, lower weight and quieter rain matter more than a perfectly clear view.
Learn more on our polycarbonate roofing page. If you are adding light to an existing roof, see our skylight and ventilator services. For a covered garden feature, our shed, gazebo and pagoda builds can use either sheet.
FAQ
Why is my multiwall polycarbonate turning green inside?
Moisture and dirt have entered the hollow channels, usually because the ends were not sealed properly. The sheet generally needs replacing, with correct end tape and caps fitted this time.
Is solid polycarbonate stronger than glass?
Yes. Polycarbonate is far more impact resistant than glass of a similar thickness and does not shatter into sharp pieces, which makes it safer for overhead use.
Can I walk on a polycarbonate roof?
You should not walk directly on the sheets. Use crawling boards spread across the supports, or ask a contractor to handle cleaning and repairs safely.
Talk to a Polycarbonate Specialist
Amber Services can visit your home, measure the space and recommend the right polycarbonate sheet for your needs. Call 6641 1524 or WhatsApp +65 8193 5135 to book a free inspection.





Comments